admin

Recovery Vehicle

This unit is ideal for all facets of overhead works. Capable of wire feed out at tension or wire recovery system back onto drums.

This unit’s small footprint makes it the choice for maintenance works in confined spaces. All functions are remote control.
Tunnel compliant engine emissions

Tension Tilt Left & Right

20 Degrees

admin In Rail Wiring Solutions

This unit has a total of 30kN of force, 15kN per drum for recovery or tension force. Independent dual direction drums offers the flexibility of one recovering and the other tensioning or both drums recovering or both tensioning.

Drum Specs

Maximum drum diameter = 2400 mm | Maximum drum width = 1300 mm | Maximum drum weight = 5000 kg

Pull Force

Maximum pull force 10 kN + 10 kN simultaneously

Speed

Maximum speed 83 m/minute – 5Km/h Skid Weight 4800 kg

admin In Rail Wiring Solutions

Overhead Feed and Tensioner

Exclusively built to efficiently run new overhead wire at full tension. Prevents over tension of wire common in traditionally methods as well as un-matched job efficiency.

Tunnel compliant engine emissions

Vehicle Configurations

(2) + 6 x 4 configurations

Track Drive

Cab, (1 operator controls both vehicles)

Drum Stands

Hydraulic splitting, take up to 5000kg per stand

admin In Hi-Rail Access Vehicles

Scissor Trucks

All access work for overhead work. The large platform and SWL is ideal for Maintanence and Construction works. Platform Slews 180 degrees for maximum operator comfort.

Tunnel compliant engine emissions.

Options

Pantograph and crane.

Limited stock check when booking.

Vehicle Configurations:

8 x 4 and 6 x 4

Track Drive

Platform or Cab

Payload on Platform

500kg

Max Vertical Reach

5.5 Metres

Slew Left & Right

90 degrees

Rail Electrification Vehicle with Scissor Lift

Rail Electrification Vehicle Scissor Truck

admin In Hi-Rail Access Vehicles

Manco Rail Boom Manitou 400kg SWL

All Access overhead work. Ideal for stabling yard works and close range works. 4WD allows all terrain access to track.

Tunnel compliant engine emissions

Vehicle Configurations:

Manitou 4 wheel drive

Track Drive

Basket

Payload on Platform

400kg

Max Vertical Reach

16.5 Metres

Max Horizontal Reach

7.5 Metres

admin In Hi-Rail Access Vehicles

Bucket Trucks

Bucket Truck Rail Electrification Vehicle

265KG SWL 300KG SWL 400KG SWL

265 Kg SWL Bucket Truck

All Access overhead Maintanence and Construction work. The medium size basket and jib section allows these units to navigate easily through existing overhead.Tunnel compliant engine emissions.

Options

1000kg toolbox and hardware carrying capability

Vehicle Configurations

4 x 2

Track Drive

Basket or Cab

Max Vertical Reach

13 Metres

Max Horizontal Reach

6.5 Metres

300 Kg SWL Bucket Truck

All access maintanence and construction work. The basket and dog leg jib section allow these units to navigate easily through even the most complicated overhead work. Tunnel compliant engine emissions.

Options

2000kg toolbox and hardware carrying capability.

400 Kg SWL Bucket Truck

All access construction work. The basket is oversized to allow for multiple operators and equipment required for new overhead installations. Tunnel compliant engine emissions.

Options

Toolbox and hardware carrying capability.

Hauling heavy loads along the track with great efficiency. Low unloading height. Perfect for transporting non-hi-rail equipment such as concrete agitators, and excavators.

Options

Concrete Agitator, Drum Stands

Our Low Loaders can help move your machinery and equipment local and interstate.

Options

Prime Mover & Low Loader.

Manco Group offer our Low Loader for wet hire operating across the eastcoast of Australia – Melbourne, Sydney and Brisbane.

Overhead Construction, Carting and positioning poles and hardware.

Options

5500 Scissor Platform, EWP Bucket, Pole & Structure Guides, Drum stands, and Trailer.

Make it a combo

All

Recovery Vehicle

20ft Tensioner Skid

admin In Rail Construction Vehicles

Konecranes Forklift

This Heavy Duty Workhorse is suited for all industrial heavy lifting applications including transport and logistics, ports, rail terminals, mining and waste.

This unit is ideal for all facets of overhead works. Capable of wire feed out at tension or wire recovery system back onto drums.

This compact, fully independent twist lock mounted dual drum unit is ideal for tensioning and recovery of overhead wire.

Exclusively built to efficiently run new overhead wire at full tension. Prevents over tension of wire common in traditionally methods as well as un-matched job efficiency.

All access work for overhead work. The large platform and SWL is ideal for Maintanence and Construction works. Platform Slews 180 degrees for maximum operator comfort.

Options

All Access overhead work. Ideal for stabling yard works and close range works. 4WD allows all terrain access to track.

265 Kg SWL Bucket Truck

Options

300 Kg SWL Bucket Truck

Options

400 Kg SWL Bucket Truck

Options

Hauling heavy loads along the track with great efficiency. Low unloading height. Perfect for transporting non-hi-rail equipment such as concrete agitators, and excavators.

Options

Our Low Loaders can help move your machinery and equipment local and interstate.

Options

Manco Group offer our Low Loader for wet hire operating across the eastcoast of Australia – Melbourne, Sydney and Brisbane.

Overhead Construction, Carting and positioning poles and hardware.

Options

Make it a combo

Recovery Vehicle

20ft Tensioner Skid

This Heavy Duty Workhorse is suited for all industrial heavy lifting applications including transport and logistics, ports, rail terminals, mining and waste.